SSV WORKS 10M 10 Subwoofer+MB Quart Amplifier Amp For Polaris RZR/ATV/UTV/Cart

Package Includes:

(1) SSV WORKS 10M 10 600w Waterproof Subwoofer Sub 4 Polaris RZR/ATV/UTV/Cart/Jeep
(1) MB Quart NA2-400.1 400 Watt Mono Amplifier Amp For Polaris RZR/ATV/UTV/Cart

Description of SSV-10M:

Our premium Marine subwoofer started the revolution. They produce great volume and clarity for the price and are very reliable. – 10 600 watt (300w RMS) woofer

Features:

SSV WORKS 10M 10 600W Waterproof Subwoofer 4 Polaris RZR/ATV/UTV/Cart/Jeep
RMS Power Handling : 300 Watts
Peak Power Handling: 600 Watts
Impedance : SVC 4 Ohm
Sensitivity : 87.56 dB
Mounting Depth : 4.63 inches
Mounting Diameter : 9.19 inches
Min Sealed Box Vol : 0.30 cu. Ft.
Max Sealed Box Vol : 1.10 cu. Ft.

Click here for the Installation Guide

How to install an amplifier in your UTV:

Features of NA2-400.1:

Marine Grade Protection:
conformal coated PC boards resist corrosion from salt spray & moisture.
Pre-Amp Circuitry: Q-stasis Pre Amplifier Stage
The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
Inputs: 2 pair. RCA Nickel-Plated
High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
Operation Mode: Mono Operation
Deisgned to power 1 subwoofer or subwoofer system
Crossover / Signal Shaping: LPF
Complete control of amplifier signal. essential when using two or more amplifiers
Class / Topology: Full Range Class D
Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
Output Devices Technology: Pwm Mosfet Power Supply
Stable power through the PC board with minimal heat generation
Heat Sink: Aluminum
Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
Power Supply: Simpatico Coil Design
The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
Output Connections: Quick Dissconect Wires. RCA Connections
Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
Connections Type: Nickel-Plated Connections
Nickel plated corrosion resistant connections
Diagnostics: Three-Stage Protection Circuits
Monitor thermal. overload. DC. and speaker short protection with lighted indicators on the amplifier end panel
Marinized / Waterproof:
Water resistant for durability in any environment

Specifications:

Class: Full Range Class D
Variable Voltage: 0.2V~9V
Signal to Noise Ratio: >100dB
Frequency Respponse: 10Hz-300Hz
Crossover Type: Electronic 12dB Per Octave
Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz
Bass Boost: 0-12dB@45Hz
Subsonic Filter: 60Hz
Power @ 2-Ohms:1 x 400W
Power @ 4-Ohms: 1 x 200W
Total

• Package Includes: (1) SSV WORKS 10M 10 600w Waterproof Subwoofer Sub 4 Polaris RZR/ATV/UTV/Cart/Jeep. (1) MB Quart NA2-400.1 400 Watt Mono Amplifier Amp For Polaris RZR/ATV/UTV/Cart
• Features of SSV-10M: SSV WORKS 10M 10 600W Waterproof Subwoofer 4 Polaris RZR/ATV/UTV/Cart/Jeep. RMS Power Handling : 300 Watts. Peak Power Handling: 600 Watts. Impedance : SVC 4 Ohm. Sensitivity : 87.56 dB. Mounting Depth : 4.63 inches. Mounting Diameter : 9.19 inches. Min Sealed Box Vol : 0.30 cu. Ft.. Max Sealed Box Vol : 1.10 cu. Ft.
• Features of NA2-400.1 RZR: Marine Grade Protection: conformal coated PC boards resist corrosion from salt spray & moisture.. Pre-Amp Circuitry: Q-stasis Pre Amplifier Stage: The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality. Inputs: 2 pair. RCA Nickel-Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
• Operation Mode: Mono Operation: Deisgned to power 1 subwoofer or subwoofer system. Crossover / Signal Shaping: LPF: Complete control of amplifier signal. essential when using two or more amplifiers. Class/Topology: Full Range Class D: Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.. Output Devices Technology: Pwm Mosfet Power Supply: Stable power through the PC board with minimal heat generation.
• Heat Sink: Aluminum: Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration. Power Supply: Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. Output Connections: Quick Dissconect Wires. RCA Connections: Quickly remove amplifer when you are putting machine up for the winter of as a security precaution.