SoundStream Rubicon Nano 2000 W Class D 5 Channel Car Audio Amplifier

Keep the music going hard from the club to the afterparty with the SoundStream Rubicon Nano 2000 W Class D 5 Channel Car Audio Amplifier. This car audio amplifier is an ideal addition or replacement for your existing car audio setup. delivering those deep. low notes with <0.05 percent total harmonic distortion. A hybrid aluminum alloy heatsink construction provides optimal heat dissipation so you do not need to worry about your equipment overheating. The Rubicon Nano features an boostd power supply. output stage components. and monoblock bridging capability providing you an exciting and versatile audio system. Easily install your car audio amplifier thanks to the signal inputs. power/ground inputs. and speaker connections located on the edge of the chassis for simple access. Accessiblely create adjustments with pre-amp and crossover options fixed on the top surface of the amplifier. An included remote gain control knob allows you to tune your amps input stage to accept the proper voltage level to ensure better sound and to maintain your equipment. Measuring 12 inches long. 8.25 inches wide. and 2.75 inches high you can ensure you have room to install this exciting car audio sound amplifier. Upgrade the stereo system in your car or truck from factory to fantastic with the SoundStream Rubicon Nano Car Audio Amplifier.

• Class D car audio amplifier features a hybrid aluminum alloy heatsink construction for optimal heat dissipation
• 5-channel amplifier powered by maximum power of 2000 watts providing powerful sound
• RMS power of 75W x4 plus 300W x1 at 4 ohms. 100W x4 plus 500W x1 at 2 ohms. and 200W x2 plus 500W x1 at 4 ohms bridged
• Included remote gain control knob allows you to tune your amps input stage to accept the proper voltage level
• Attributes an boostd power supply. output stage components. and monoblock bridging capability
• Signal inputs. power/ground inputs. and speaker connections located on edge of chassis for simple install
• Pre-amp and crossover options fixed on the top surface to assist with simple adjustments and installation
• Low pass filter: 50Hz to 500Hz / (x10) 500Hz to 5KHz
• High Pass Filter: 50Hz to 500Hz / (x10) 500Hz to 5KHz
• Bass boost: 0 to 18dB (channel 5)
• Bass boost frequency: 45Hz (channel 5)
• Subsonic filter: 20Hz to 50Hz (channel 5)
• Frequency response: 10Hz to 50KHz (channel 1 through 4) / 10Hz to150Hz (channel 5)
• Signal-to-noise: 104dB
• Input sensitivity: 200Mv to 6V
• Total harmonic distortion: <0.05 percent
• Operation voltage: 9V to 16V DC
• Futilize rating: 30 amps x 3
• Dimensions (L x W x H): 12 x 8.25 x 2.75 inches
• Weight: 8.3 pounds
• Manufacturer’s warranty: 1-year warranty