Sound Storm Laboratories US8 8 inch Under Seat Powered Car Audio Subwoofer – 800 Watts Max. Low Profile. Built in Amplifier. for Truck. Boxes and Enclosures. Remote Subwoofer Control

Sound Storm Laboratories US8 8 Inch Under Seat Powered Car Audio Subwoofer – 800 Watts Max. Low Profile. Built in Amplifier. For Truck. Boxes and Enclosures. Remote Subwoofer Control 8 Inch Under Seat Subwoofer – 800 Watts Max. Low Profile. Built in Amplifier. Subwoofer Control

• Built-in Amplifier – With a MOSFET power supply you get improved switching speeds. better performance with less power from the driver. lower gate-to-drain feedback capacitance. lower thermal impedance for higher switching frequencies
• PWM – Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. It’s efficient & reliable
• Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High Level Inputs – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the US10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low-Level Inputs – Line level inputs. also known as RCA inputs or low-level inputs. use RCA interconnect cables to link the US10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• • Built-in Amplifier – With a MOSFET power supply you get improved switching speeds. better performance with less power from the driver. lower gate-to-drain feedback capacitance. lower thermal impedance for higher switching frequencies
  • PWM – Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. It’s efficient & reliable
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the US10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low-Level Inputs – Line level inputs. also known as RCA inputs or low-level inputs. use RCA interconnect cables to link the US10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up out of phase
  • Specs ?C 12.2 x 8.85 x 2.95. 8.2 Lbs. LED status indicator. Thermal. short and overload protection circuits. High performance voice coil. Rubber surround. Aluminum cone. The all-in-one combo makes this ideal for spatially challenged vehicles
  • Warranty – Sound Storm Laboratories provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Walmart.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
  • One 8 Woofer with SINGLE 2.6 ohm Voice Coil
  • 800 Watts MAX 400 Watts RMS Power Handling
  • RCA & Speaker Level Inputs. High Level Inputs
  • Thermal. Short and Overload Protection Circuits. Power & Protection LEDs
  • Phase Control. Low Pass Crossover. Variable Bass Boost. Input Gain Control
  • S/N Ratio> 90 dB. Frequency Response 30Hz to 150Hz
  • Remote Subwoofer Control