- Built-in Amplifier – With a MOSFET power supply you get improved switching speeds. better performance with less power from the driver. lower gate-to-drain feedback capacitance. lower thermal impedance for higher switching frequencies
- PWM – Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. It’s efficient & reliable
- Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Inputs – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the US10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low-Level Inputs – Line level inputs. also known as RCA inputs or low-level inputs. use RCA interconnect cables to link the US10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up out of phase
- Specs ?C 13.58 x 10.43 x 3.15. 10.6 Lbs. LED Status Indicator. Thermal. Short and Overload Protection Circuits. High performance voice coil. Rubber surround. Aluminum cone. The all-in-one combo makes this ideal for spatially challenged vehicles
- Warranty – Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- 10 Woofer with SINGLE 2.6 ohm Voice Coil
- 1000 Watts MAX 500 Watts RMS Power Handling
- RCA & Speaker Level Inputs. High Level Inputs
- Thermal. Short and Overload Protection Circuits. Power & Protection LEDs
- Phase Control. Low Pass Crossover. Variable Bass Boost. Input Gain Control
- S/N Ratio> 90 dB. Frequency Response 30Hz to 150Hz
- Remote Subwoofer Control
Specifications
Features | 10 1000W Amplified Subwoofer System with Enclosure |
Brand | Sound Storm Laboratories |
Manufacturer Part Number | US10 |
Manufacturer | Sound Storm Laboratories |
Assembled Product Dimensions (L x W x H) | 13.58 x 10.43 x 3.15 Inches |
Reviews
There are no reviews yet.