- Power – 3000 Max x 1 @ 1 Ohm. 1500 Max x 1 @ 2 Ohms. 750 Max x 1 @ 4 Ohms
- Class D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight. reduced power waste. smaller heat sink. compact circuitry
- 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable – You are able to strap two EV3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up out of phase
- Power – 3000 Max x 1 @ 1 Ohm. 1500 Max x 1 @ 2 Ohms. 750 Max x 1 @ 4 Ohms
- Class D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight. reduced power waste. smaller heat sink. compact circuitry
- 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable – You are able to strap two EV3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up out of phase
- Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out. the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- Variable Low Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Specs – Dimensions: 13 x 10 x 2.30. Weight: 9.30 lbs.. Speaker Impedance: 1 to 8 Ohm. THD @ RMS Output: 0.01%. S/N Ratio: 100 dB. Frequency Response: 15 Hz to 150 Hz. Fuse: Two 35 amp ATO blade
- Warranty – Sound Storm Laboratories provides a 6 Year Platinum Online Dealer Warranty for purchases through We strongly encourage professional installation of this product to ensure proper functionality
- MODEL 3000W High Output MONOBLOCK Amplifier
Up to 2250 W X 1 RMS @ 1 ohm
Up to 1125 W X 1 RMS @ 2 ohm
Up to 563 W X 1 RMS @ 4 ohm
Up to 4500 W X 1 RMS Strapped Bridged Power @ 2 ohm - Monoblock. Class D. MOSFET Power Supply
- Low Level Inputs. RCA Pre-amp Outputs
- Variable Low Pass Crossover. Variable Bass Boost and Variable Subsonic Filter and Switchable Phase Control
- Include Remote Subwoofer Control
- Dimensions: 13 L x 10 W x 2.3 H
Specifications
Features | ? Power – 3000 Max x 1 @ 1 Ohm. 1500 Max x 1 @ 2 Ohms. 750 Max x 1 @ 4 Ohms. ? Class D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight. reduced power waste. smaller heat sink. compact circuitry. ? 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to. ? Strapping Capable – You are able to strap two EV3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power. ? Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up out of phase. ? Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out. the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion. ? Variable Low Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction. ? Specs – Dimensions: 13 x 10 x 2.30. Weight: 9.30 lbs.. Speaker Impedance: 1 to 8 Ohm. THD @ RMS Output: 0.01%. S/N Ratio: 100 dB. Frequency Response: 15 Hz to 150 Hz. Fuse: Two 35 amp ATO blade. ? Warranty – Sound Storm Laboratories provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality |
Brand | Sound Storm Laboratories |
Manufacturer Part Number | EV3000D |
Manufacturer | Sound Storm Laboratories |
Assembled Product Weight | 9.3 lb |
Assembled Product Dimensions (L x W x H) | 13.00 x 10.00 x 2.30 Inches |
Reviews
There are no reviews yet.