Video of K5 SERIES:
Loaded Sub Enclosure Features:
Rockville Single 10 K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure
Peak Power Handling: 1200 Watts
Program Power Handling: 600 Watts
CEA Rated RMS Power Handling: 300 Watts
Final Impedance: 4 Ohm
? MDF enclosure
Bonded stapled and braced
Computer designed vents
Angled at 15 % for perfect bass alignment
High quality aviation grade tweed carpet
Satin Nickel speaker wire push terminals
Enclosure air space is 1.0 Cu Ft per sub
Vent dimensions (inches): 2 x 6.5 x 8
Tuning frequency of enclosure: 35 Hz
2 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
40 Oz High Quality Magnet
Cast Iron Basket With Black Sanded Finish
Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone ?C This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
Blue Stitching Cone Reinforcement Ensures Long Life
Polypropylene Dust cap
Gold-Plated spring loaded push terminals
Impedance: Single 4-Ohm Voice Coils
Vented Hole on T-yoke Enhances Heat Dissipation
Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight
High BL Magnetic Motor Gap
High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
Cutout Diameter: 9.05 inches
Mounting Depth: 4.52 inches
Frequency Response: 28 Hz – 1.3K kHz
6mm T-Yoke + 6mm Washer
Sensitivity: 87.7dB
Loaded enclosure weight: 33.2 Lbs.
Loaded enclosure dimensions (inches): 16.25 x 13 x 14.25
Features of Amplifier:
Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote
CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker. Rockford Fosgate. etc.)
– 2 Ohm: 350 Watts x 1 Channel <1% THD+N
– 4 Ohm: 220 Watts x 1 Channel <1% THD+N
Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song)
– 2 Ohm: 1400 Watts x 1 Channel
– 4 Ohm: 880 Watts x 1 Channel
High-Speed MOSFET Power Supply
Optical Coupler Class D Technology
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Low Pass Filter: 50Hz – 250Hz
Subsonic Filter: 15Hz – 55Hz
Phase Control
Full IC-Controlled Protection Circuitry
Fully Adjustable 12dB Bass Equalizer
Mute and Delay Soft Start System
Status Mode LED Indicator
Minimum THD at Rated Power: <0.1%
S / N Ratio: >90dB
Under Voltage Protection at 10V
Over Voltage Protection at 16V
Frequency Response: 15Hz – 250 Hz
Features of wir
- Rockville Single 10 K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1200 Watts. Program Power Handling: 600 Watts. CEA Rated RMS Power Handling: 300 Watts. Final Impedance: 4 Ohm. MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 1.0 Cu Ft per sub. Vent dimensions (inches): 2 x 6.5 x 8
- Tuning frequency of enclosure: 35 Hz. 2 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 40 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Polypropylene Dust cap. Gold-Plated spring loaded push terminals. Impedance: Single 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation. Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight. High BL Magnetic Motor Gap
- High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power. Cutout Diameter: 9.05 inches. Mounting Depth: 4.52 inches. Frequency Response: 28 Hz – 1.3K kHz. 6mm T-Yoke + 6mm Washer. Sensitivity: 87.7dB. Loaded enclosure weight: 33.2 Lbs.. Loaded enclosure dimensions (inches): 16.25 x 13 x 14.25. Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote
- CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker. Rockford Fosgate. etc.) – 2 Ohm: 350 Watts x 1 Channel <1% THD+N – 4 Ohm: 220 Watts x 1 Channel <1% THD+N. Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) – 2 Ohm: 1400 Watts x 1 Channel – 4 Ohm: 880 Watts x 1 Channel. High-Speed MOSFET Power Supply
Specifications
Brand | Rockville |
Manufacturer Part Number | SK510 PACKAGE |
Manufacturer | ROCKVILLE |
Reviews
There are no reviews yet.