Videos of RXM-T2:
Description:
The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain. moisture. splashing. heat. cold. saltwater. vibrations. the sun. and anything else you will throw at it! The small footprint creates this durable so you can mount the amplifier even in the tightest locations. The other thing that creates this amp so durable is that it is a class D power supply. So even if you run it at a really low impedance the amplifier can handle it!
The RXM-T2 is rated at 1200w RMS; Dyno Certified RMS Power Ratings! This amp performs at 600 x 2 @ 2 ohms and when you bridge it you get 1200 x 1 @ 4 ohms! This is a full range class D amplifier. It is super-efficient. The peak rating can be utilized to compare with brands who utilize peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be utilized to compare with top brands such as Kicker. Rockford. Alpine. etc.
Attributes:
Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier
Full-Range Class D Amplifier Architecture
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
Fully marine grade amplifier with conformal-coated PCB board
Protected from moisture. saltwater. UV. bumps. vibrations. heat. cold. and more
Double Sided Surface Mount (SMD) PCB Design
High-Speed MOSFET Power Supply
Studio-Grade Bipolar Output Stage Transistors
2-Ohm Stable Stereo
4-Ohm Mono Bridgeable
Mute and Delay Soft Start System
Full IC-Controlled Protection Circuitry
RCA Preamp Line Output
Status Mode LED Indicator
8 Volt Preamp Circuitry
4 Gauge Lucite Encapsulated Power/Ground Terminals
12 Gauge Lucite Encapsulated Speaker Terminals
Fully Adjustable 12dB / Octave Crossover
Low Pass 50Hz – 250Hz
High Pass 50Hz – 250Hz
Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
Minimum THD at Rated Power: < 0.05%
Frequency Response: 15Hz – 20KHz
S / N Ratio: 100dB
S/N Ratio: >97dB
Damping Factor: > 200 @ 100Hz
3 x 35 Amp Futilizes
Dimensions: (W x H x L) 6.7 x 1.98 x 12.25
- Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier. Full-Range Class D Amplifier Architecture. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged. Fully marine grade amplifier with conformal-coated PCB board. Protected from moisture. saltwater. UV. bumps. vibrations. heat. cold. and more.
- Double Sided Surface Mount (SMD) PCB Design. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. Status Mode LED Indicator.
- 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB / Octave Crossover. Low Pass 50Hz – 250Hz. High Pass 50Hz – 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. Minimum THD at Rated Power: < 0.05%.
- Frequency Response: 15Hz – 20KHz. S / N Ratio: 100dB. S/N Ratio: >97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Futilizes. Dimensions: (W x H x L) 6.7 x 1.98 x 12.25
Details
Assembled Product Weight | 18.31 oz |
Brand | Rockville |
Manufacturer Part Number | RXM-T2 |
Manufacturer | ROCKVILLE |
Model | RXM-T2 |
Color | Black |
Assembled Product Dimensions (L x W x H) | 16.00 x 8.60 x 3.80 Inches |
Reviews
There are no reviews yet.