Rockville RVB8.1A 8 Inch 300W Powered Car Subwoofer/Sub Enclosure Box + Remote

MAXIMUM BASS… LESS SPACE??FAST PACE.
The Rockville RVB8.1A is an 8 powered subwoofer that gives you everything you want out of a car subwoofer. This is a complete system with the subwoofer installed in to a heavy-duty vented enclosure. along with a built in high power amplifier. This sub system will give you more bass in your car or truck. without giving up tons of space to get it. I’m sure you want tight clean bass that hits with the ease of a quick installation. With the RVB8.1A you get it all. no need for a time consuming separate amplifier and woofer installation. Just drop it in and it’s done.
Our engineers used sophisticated computer modeling and created an ultra efficient bass enclosure for an 8 woofer that takes up less than 1.00 cubic feet. Combined with a 15?? sloped back the RVB8.1A will fit snuggly against the rear seat in your trunk and take up almost no room at all. Turbo tuned with an aero style port you will be astounded at the bass output this little bass enclosure produces. The aero port is side mounted on the enclosure so the low frequencies get a chance to load in to your car trunk and the bass waves get a chance to fully develop before entering the passenger compartment. We are talking about low bass frequencies that you can actually fee; infrasonic bass. In most cases packaged systems put out weak bass that is not deep. Our Rockville subwoofer was engineered and tuned to put out the bass you can feel!

Features:

• Rockville RBV8.1A Single 8 300 Watts Active Subwoofer Enclosure
• Power Handling: 300 Watts Peak/200 Watts RMS
• Size: 8
• Nominal Impedance: Single 4-Ohm
• 38mm Voice Coil
• Inverted Carbon Graphite Molded Dust Cap
• Kevlar Reinforced Pulp Cone
• Satin Blue Chrome Woofer Trim Gasket
• Double Laminated Foam Surround. Stitched to Cone
• Frequency Response: 38Hz – 200Hz
• Sensitivity: 91dB
• Anti-Vibration Braced MDF Cabinet
• Hatchback Style. Angled Back Fits Perfectly Against Rear Seats
• Computer Tuned Bass Reflex Port
• Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo

Details:

• High Speed MOSFET Power Supply
• High Level Speaker Inputs
• Low Level RCA Inputs
• Built-In Low Pass Crossover (30Hz – 150Hz)
• Accepts up to 8 Gauge Wire
• 100mV – 5V Input Voltage
• Power (Blue) & Diagnostic (Red) LED Indicators
• 20A Fuse
• Dimensions: 13 x 12.5 x 13

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality. Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins. Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a

• Features: Rockville RBV8.1A Single 8 300 Watts Active Subwoofer Enclosure. Power Handling: 300 Watts Peak/200 Watts RMS. Size: 8. Nominal Impedance: Single 4-Ohm. 38mm Voice Coil
• Inverted Carbon Graphite Molded Dust Cap. Kevlar Reinforced Pulp Cone. Satin Blue Chrome Woofer Trim Gasket. Double Laminated Foam Surround. Stitched to Cone. Frequency Response: 38Hz – 200Hz
• Sensitivity: 91dB. Anti-Vibration Braced MDF Cabinet. Hatchback Style. Angled Back Fits Perfectly Against Rear Seats. Computer Tuned Bass Reflex Port
• Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo. Details: High Speed MOSFET Power Supply. High Level Speaker Inputs. Low Level RCA Inputs
• Built-In Low Pass Crossover (30Hz – 150Hz). Accepts up to 8 Gauge Wire. 100mV – 5V Input Voltage. Power (Blue) & Diagnostic (Red) LED Indicators. 20A Fuse. Dimensions:13 x 12.5 x 13