Package Includes:
(1) Rockville MS10LB 10 2400 Watt Black Marine/Boat 10 Subwoofer with LED
(1) Rockville dBM12 2000w Peak/500w Dyno-Certified RMS Class-D Mono 2-Ohm Marine Amplifier With Terminal Covers and Bass Remote
(1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Attributes of MS10LB:
Rockville MS10LB 10 marine subwoofer with LED (Black)
Max Power: 2400 Watts
RMS Program Power: 1200 Watts
RMS Power: 600 Watts
Polypropylene cone with Rubber edge
2.0 4 Layer dual voice coil
Molded ABS plastic binquireet made with a special blend that is waterproof and un-breakable (if you literally jump on it. it will not break or bend)
Magnet 80 Oz double stacked magnet
Frequency response: 30Hz-4Khz
Impedance: Dual 4 ohms
Sensitivity: 90dB
Total diameter:10.6
Cutout diameter:9.13
Total height:7.2
Mounting depth:5.6
Details:
Free Air Resonance (Fs): 31.05 Hz
Electrical Q (Qes): 0.5577
Mechanical Q (Qms): 2.3313
Total Speaker Q (Qts): 0.45
Equivalent Compliance (Vas): 1.676 cu ft / 47.4728 L
One-Way Linear Excursion (Xmax): 0.41 in / 10.5 mm
Reference Efficiency (No): 0.25%
Efficiency (1 W / 1 m): 86.7 dB SPL
Effective Piston Area (Sd): 51.15 sq in / 0.033 sq m
DC Resistance (Re): 3.4 ??
Nominal Diameter: 10.0 in / 250 mm
Overall Diameter: 10.55 in / 268 mm
Mounting Hole Diameter: 9.0 in / 229 mm
Owner’s Manual
Attributes of DBM12:
Rockville dBM12 2000 Watt Class-D Mono 2-Ohm Marine Amplifier With Terminal Covers and Bass Remote
CEA Compliant Power Ratings:
2 Ohm: 500 Watts x 1 Channel
4 Ohm: 300 Watts x 1 Channel
RMS Power Ratings:
2 Ohm: 1000 Watts x 1 Channel
4 Ohm: 600 Watts x 1 Channel
Peak Power Ratings:
2 Ohm: 2000 Watts x 1 Channel
4 Ohm: 1200 Watts x 1 Channel
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Adjustable Low Pass Filter: 50Hz – 250Hz
Adjustable Subsonic Filter: 15Hz – 55Hz
Adjustable Input Level Control
Fully Adjustable 12dB Bass Equalizer
Minimum THD at Rated Power: <0.1%
S/N Ratio: >90 dB
Frequency Response: 15Hz – 250Hz
Damping Factor: >150 @ 100Hz
60 Amp Maxi Futilize
Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
Owner’s Manual
Video of RMWK:
Attributes:
Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Setup Kit
20 ‘ Translucent. Twisted Pair. High Standard. Tinned-OFC F
- Package Includes: (1) Rockville MS10LB 10 2400 Watt Black Marine Free Air Subwoofer with LED’s. (1) Rockville dBM12 2000w Peak/500w Dyno-Certified RMS Class-D Mono 2-Ohm Marine Amplifier With Terminal Covers and Bass Remote. (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
- Attributes of MS10LB: Rockville MS10LB 10 Marine Free Air Subwoofer with LED (Black). Free air subwoofer does not require any enclosure. Max Power: 2400 Watts. RMS Program Power: 1200 Watts. RMS Power: 600 Watts. Polypropylene cone with Rubber edge. 2.0 4 Layer dual voice coil. Molded ABS plastic binquireet made with a special blend that is waterproof and un-breakable (if you literally jump on it. it will not break or bend). Magnet 80 Oz double stacked magnet.
- Frequency response: 30Hz-4Khz. Impedance: Dual 4 ohms. Sensitivity: 90dB. Total diameter:10.55. Cutout diameter:9.0. Mounting depth:5.6
- Attributes of RMWK8: Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Setup Kit. 20′ Translucent. Twisted Pair. High Standard. Tinned-OFC Flexible PVC RCA Cable. 18′ 8 Gauge High Current. Low Impedance. Clear Flexible Power Cable with 3′ Black Poly Woven Mesh to better resist chemicals in the battery compartment.
- Attributes of dBM12: Rockville dBM12 2000w Peak/500w Dyno-Certified RMS Class-D Mono 2-Ohm Marine Amplifier With Terminal Covers and Bass Remote. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 2 Ohm: 500 Watts x 1 Channel. 4 Ohm: 300 Watts x 1 Channel.
Details
Brand | Rockville |
Manufacturer Part Number | MS10LB+DBM12+RMWK4 |
Manufacturer | ROCKVILLE |
Reviews
There are no reviews yet.