Rockville KRYPTON F2 2400w Peak/600w RMS 4 Channel Amplifier Car Stereo Amp

What’s in the Box:

• Amplifier
• Birth sheet with tested power
• Owner’s manual
• Mounting Screws
• Warranty

Features:

• Rockville KRYPTON F2 2400w Peak/600w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
  
  • 2 Ohm: 150 Watts x 4 Channels <1% THD+N
  • 4 Ohm: 100 Watts x 4 Channels <1% THD+N
  • 4 Ohm Bridged: 300 Watts x 2 Channel
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)
  
  • 2 Ohm: 600 Watts x 4 Channels
  • 4 Ohm: 400 Watts x 4 Channels
  • 4 Ohm Bridged: 1200 Watts x 2 Channels
• All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
• All channels on the amplifier are bridgeable
• Digital Voltage Display on Amp
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob)
• Adjustable Low Pass Filter: 40Hz ?C 4KHz
• Adjustable Band Pass Filter: 15 Hz – 4 kHz (use both the HPF and LPF filter)
• Adjustable High Pass (Subsonic) Filter: 15 Hz – 4 kHz
• 2CH/4CH Input Mode Switch
• 8 Volt Preamp Circuitry
• Under Voltage Protection at 10V
• Over Voltage Protection at 16V
• High-Speed MOSFET Power Supply
• Full IC-Controlled Protection Circuitry
• Fully Adjustable 12dB Bass Equalizer
• Adjustable Input Level Control
• Studio-Grade Bipolar Output Stage Transistors
• Mute and Delay Soft Start System
• Status Mode LED Indicators
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: >90dB
• Frequency Response: 10Hz – 50KHz
• Damping Factor: >85 @ 100Hz
• 40 Amp x 2 ATC Fuses
• Dimensions: (Lx W x H) 16.3? x 8.7? x 2.2?

Owner’s Manual? ??

Rockville KRYPTON F2 2400w Peak/600w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp..Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 2 Ohm: 150 Watts x 4 Channels <1% THD+N. 4 Ohm: 100 Watts x 4 Channels <1% THD+N..4 Ohm Bridged: 300 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc). 2 Ohm: 600 Watts x 4 Channels. 4 Ohm: 400 Watts x 4 Channels. 4 Ohm Bridged: 1200 Watts x 2 Channels..All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp..Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz 4KHz. Adjustable Band Pass Filter: 15 Hz – 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz – 4 kHz