Rockville K5 W12K5S2 12 1400w 2 Ohm Car Audio Subwoofer Sub 350w RMS CEA Rated!

Video of K5 SERIES:

Features:
Rockville W12K5S2 K5 Series 12 2-Ohm Car Subwoofer
Peak Power Handling: 1400 Watts
Program Power Handling: 700 Watts
CEA Rated RMS Power Handling: 350 Watts
2 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
50 Oz High Quality Magnet
Cast Iron Basket With Black Sanded Finish
Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone ?C This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
Blue Stitching Cone Reinforcement Ensures Long Life
Paper Dustcap is light weight and efficient helping the sub to play louder even if your amp is not so powerful
Chrome-Plated Binding Post Terminals – These are the best terminals on the market and they accept any gauge wire
Impedance: Single 2-Ohm Voice Coil
Vented Hole on T-yoke Enhances Heat Dissipation
Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight
High BL Magnetic Motor Gap
We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
Cutout Diameter: 11.02 inches
Mounting Depth: 5.03 inches
Frequency Response: 25 Hz – 1.5K kHz
6mm T-Yoke + 6mm Washer
Sensitivity: 88dB
Sealed Enclosure Volume: 0.8 ?C 1.3 Cubic Feet
Vented/Ported Enclosure Volume: 1.3 ?C 2.0 Cubic Feet
Weight: 10.1 Lbs.
Shipping Weight: 11.6 Lbs.
Shipping Box Dimensions: 13.78 x 13.78 x 8.97 Inches
Detailed Info:
Body: Non-Pressed Paper
Gap Plate Inside Diameter: 80mm (3.14 inches)
Gap Plate Outside Diameter: 156mm (6.14 inches)
Gap Plate Thickness: 25mm (0.98 inches)
Yoke Outside Diameter: 145mm (5.7 inches)
Yoke Thickness: 6mm (0.23 inches)
Yoke Pole Diameter: 50mm (2 inches)
T/S Parameters (Tested on a Klippel)
Electrical Parameters
 
 
 
Re
2.06
Ohm
electrical voice coil resistance at DC
Le
0.689
mH
frequency independent part of voice coil inductance
L2
1.367
mH
para-inductance of voice coil
R2
12.77
Ohm
electrical resistance due to eddy current losses
Cmes
1339.39
??F
electrical capacitance representing moving mass
Lces
11.94
mH
electrical inductance representing driver compliance
Res
20.04
Ohm
resistance due to mechanical losses
fs
39.8
Hz
driver resonance frequency
 
 <

• Features: Rockville W12K5S2 K5 Series 12 2-Ohm Car Subwoofer. Peak Power Handling: 1400 Watts. Program Power Handling: 700 Watts. CEA Rated RMS Power Handling: 350 Watts. 2 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 50 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Paper Dustcap is light weight and efficient helping the sub to play louder even if your amp is not so powerful
• Chrome-Plated Binding Post Terminals – These are the best terminals on the market and they accept any gauge wire. Impedance: Single 2-Ohm Voice Coil. Vented Hole on T-yoke Enhances Heat Dissipation. Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet. Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight. High BL Magnetic Motor Gap
• We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 11.02 inches. Mounting Depth: 5.03 inches. Frequency Response: 25 Hz – 1.5K kHz. 6mm T-Yoke + 6mm Washer. Sensitivity: 88dB. Sealed Enclosure Volume: 0.8 – 1.3 Cubic Feet. Vented/Ported Enclosure Volume: 1.3 – 2.0 Cubic Feet. Weight: 10.1 Lbs.. Shipping Weight: 11.6 Lbs.. Shipping Box Dimensions: 13.78 x 13.78 x 8.97 Inches
• Detailed Info: Body: Non-Pressed Paper. Gap Plate Inside Diameter: 80mm (3.14 inches). Gap Plate Outside Diameter: 156mm (6.14 inches). Gap Plate Thickness: 25mm (0.98 inches). Yoke Outside Diameter: 145mm (5.7 inches). Yoke Thickness: 6mm (0.23 inches). Yoke Pole Diameter: 50mm (2 inches)