Rockford Fosgate R2S-1X10 10 400W Car Subwoofer + Box + 550W 2-Ch Amp + Amp Kit

**Package Includes:**
1 x Rockford Fosgate R2S 1X10 10 400W Car Subwoofer + Enclosure
1 x Renegade REN550S 550W 2 Channel Car Amplifier
1 x SoundStorm AKS8 8 Gauge Complete Amplifier Installation Kit
The **Rockford Fosgate R2S 1X10** subwoofer is a single 10 shallow enclosure with 200 Watts RMS power handling wired to a 2 Ohm load. The enclosure is constructed with 5/8 MDF. covered in high density carpet. and features quick release compression terminals. The **Renegade REN550S** 2 channel amplifier features a MAX power handling of 550 watts at 2 ohms and a RMS power handling of 270 watts at 2 ohms. This amplifier features a MOSFET power supply which has higher switching speed than other transistors which make it great for power amplifiers. 2 Channel amplifiers are commonly used to power two speakers or low powered subwoofers. The Class AB means that the amplifier uses 50% of the input signal while the other percentage is turned off. These amplifiers run cooler and more efficiently with low distortion and high reliability. Not only is the Shaker Series Amplifier Installation Kit a true lifesaver. but it also is designed to make your entire sound system work at peak performance. If you want your amplifier to operate at its best you simply cannot use inferior parts and accessories. Our exclusive. pre selected set of tools includes CopperCure highly conductive copper wires that are oxygen free to ensure clean and consistent power transfer. **We are an authorized Rockford Fosgate & Renegade dealer**

• **Subwoofer:**
• New Rockford Fosgate R2S 1X10 10 400 Watts Shallow Car Subwoofer Sub Enclosure
• Power Handling: 200 Watts RMS
• MAX Power: 400 Watts
• Constructed with 5/8 MDF
• Covered with high density carpet
• High current binding posts
• Nominal Impedance (ea): 2 Ohm Internally wired to create a 2 Ohm amplifier load
• System Configuration: Sealed
• Enclosure Material: 5/8 MDF
• Speaker Connector: Up to 12 AWG Compression Terminals
• CEA 2031 Compliant
• Shipping Weight: 19.9 Lbs (9.02 Kg)
• Dimensions: 13.5 x 19.0 x 5.25 (bottom) x 3.25 (top) 34.29cm x 48.26cm x 13.34cm (bottom) x 8.25cm (top)
• Condition: Brand New!
• Part Number **R2S 1X10**
• 1 Year Manufacturer Warranty
• **Amplifier:**
• New Renegade REN550S 550 Watt 2 Channel Class AB Car Audio Power Amplifier Amp
• 2 x 75 Watts RMS into 4 Ohms
• 2 x 135 Watts RMS into 2 Ohms
• 2 x 150 Watts Max. into 4 Ohms
• 2 x 275 Watts Max. into 2 Ohms
• MOSFET Power Supply
• High level Inputs
• RCA In and Outputs
• 2 Ohm Stability
• Mono bridegable
• Tri Mode Operation
• Loudspeaker impedance (stereo): 2 16 Ohm
• Frequency response: 20 30 kHz
• Total harmonic content (THD & N): >0.5%
• Channel separation: >50 dB
• Signal to noise ratio: >80 dB
• Input sensitivity: 0.1 4 Volts
• Input impedance: 10 kOhms
• Supply: +12 V (10 15 V)
• Fuse: 1 x 30 A
• High pass filter 80 2000 Hz
• Low pass filter 50 250 Hz
• Bass Boost Switch 0/+6/+12 db
• Dimensions: 255 x 55 x 200/230 mm
• Condition: Brand New!
• Part Number: **REN550S**
• Item Weight: 5.5 lbs.
• 1 Year Manufacturer Warranty
• **Amp Kit:**
• New VM Audio SRPK4R **4 Gauge Amplifier Complete Wiring Kit**
• Maximum of 2000 watts
• Complete amplifier wiring kit with cables. connectors and accessories
• 4 Gauge high current power cables with 315 multi stranded bare copper
• 4 Gauge high current ground cables with 315 multi stranded bare copper
• 18 Gauge remote turn on wire with solid red insulation jacket
• 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
• E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
• Nickel plated. high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
• 4 Gauge nickel plated power/ground solder less ring crimp terminals
• 4 Gauge nickel plated power/ground solder less spade crimp terminals
• Quick connect nickel plated crimp speaker wire connector
• Element protection power cable loom jacket
• High quality insulated solder less crimp butt terminals
• Durable high strength nylon tie wraps
• Kit includes:
• 16 Ft red 4 gauge power wire
• 3 ft black 4 gauge ground wire
• 15 ft high performance RCA wire
• 4 Gauge In line AGU fuse holder
• 60 Amp AGU fuse
• 15 ft 18 Gauge Remote wire
• 20 ft 12 gauge Speaker wire
• 20) 6 wire ties
• 2) spade connectors
• 2) ring connectors
• 3) screws
• 3) butt connectors
• 4) fasten connectors
• 5) spade connectors
• Cable firewall black rubber grommets
• Product Condition: Brand New
• Part Number: **SRPK4R**
• 1 Year Manufacturer Warranty