Rockford Fosgate P1S2-10 10 Subwoofer – SVC (2-Ohm). and a P300X1 Mono Amplifier – 200×1 @ 4-Ohm. 300×1 @ 2-Ohm

Rockford Fosgate P1S2-10 10 Subwoofer – SVC (2-Ohm). and a P300X1 Mono Amplifier – 200×1 @ 4-Ohm. 300×1 @ 2-Ohm – This bundle includes a Rockford Fosgate P1S2-10 10 Subwoofer- SVC (2-Ohm). 250 Watts Rms. 500 Watts Peak. a Rockford Fosgate P300X1 Mono Amplifier – 200×1 @ 4-Ohm. 300×1 @ 2-Ohm. a pry kit. and a Creative Audio coozy.

Rockford Fosgate P1S2-10 10 Subwoofer- SVC (2-Ohm). 250 Watts Rms. 500 Watts Peak
Specifications
Nominal Impedance: 2-Ohm
Subwoofer Type: Standard
Size: 10
Power Handling (Watts RMS): 250 Watts RMS. 500 Watts Max
Magnet Weight (oz): 45 oz. (1.28 kg.)
Voice Coil Type: Single Voice Coil
Voice Coil Diameter: 2.0 (51.6 mm)
Speaker Connector: Dual 10 AWG compression
Mounting Depth: 5.33 in. (135.4 mm)
SPL (dB @ 1w/1m): 85
SPL (dB @ 2.8v/1m): 88
Cutout Diameter: 9.14 in. (232 mm)

Rockford Fosgate P300X1 Mono Amplifier – 200×1 @ 4-Ohm. 300×1 @ 2-Ohmb
Specifications
Number of Channels: 1
Total Power (Sum of Rated Power): 300 Watts
Rated Power (RMS Continuous Power): 200 Watts x 1 @ 4-Ohm. 300 Watts x 1 @ 2-Ohm
Dynamic Power (PVC/PowerCube?): 260 Watts x 1 @ 4-Ohms 0?? Res. 444 Watts x 1 @ 2-Ohms 0?? Res
Bridgeable: No
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Input Sensitivity: 150 mV – 12 V
Circuit Topology Class: Class A/B
Efficiency (average): 74% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%. 2-Ohm: <1.0%
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low Level: 1 RCA Pair
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or. Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz. Function depends upon LP/AP/HP switch position
Crossover Controls: High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth. Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: YesRockford Fosgate P1S2-10 10" Subwoofer – SVC (2-Ohm). and a P300X1 Mono Amplifier – 200×1 @ 4-Ohm. 300×1 @ 2-Ohm