Rockford Fosgate M2-200X2 Marine 200-Watt 2-Channel Amplifier

Rockford Fosgate M2-200X2 2 Channel 200 Watt Full Range Class D Marine Amplifier

Designed to withstand the elements. the M2-200X2 Element Ready? amplifier is a 200 watt. full-range class-D model. capable of operating at 4?? or 2?? stereo. and 4?? bridged/mono. This amplifier is extremely efficient becautilize of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to assist you adjust your gain settings. a P.O.W.E.R. Supply that generates more power as voltage boosts.

This Listing Includes:
(1) Marine Amplifier
(1) 7 Speaker Input Harness
(1) 3mm Hex Key
(4) 3/4 Screws
(4) Flat Washers

Attributes:
– Element Ready? design protects against outdoor exposure
– Conformal coated circuit board protects against dust and water
– UV stable powder coated cast aluminum heatsink
– Zinc Nickel-plated Marine grade brass connection terminals
– C.L.E.A.N. input/output clip detection and indicator LEDs
– Refined using AudioGraph PowerCube measurement tool
– Focutilized mass heat sink allows critical aluminum material to be located around hottest internal devices
– Top Mounted Control Panel
– Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
– Short Circuit & Over Current Protection
– Variable Infrasonic Filter
– Merged Power and Speaker Terminals
– Stabilized Differential Inputs eliminates noise picked up by signal cables
– RCA pass-thru outputs
– Incorporation with OEM and Aftermarket Radios
– Auto-Sense turn-on with remote out (high level in)
– Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
– Low Impedance Stability
– Proprietary testing using RATS (Rockford Automated Testing System)
– CEA-2006 Compliant & CE Compliant

Details:
Number of Channels: 2
Total Power(Sum of Rated Power): 200 Watts
Bridgeable: Yes
Frequency Response: 20 Hz – 20 kHz
Circuit Topology Class: Class D
Tone Controls: No
Remote Controls: No
Power Wire Gauge: 4 AWG
Power Input Connector: Compression Terminal Block
Speaker Wire Gauge: 8 AWG
Speaker Output Connector: Compression Terminal Block
Cooling: Convection
Operating Voltage: 9 – 16 VDC
Recommended Futilize(not included): 30 A
Max. Current Draw (13.8V Sinewave): 18 A

Rated Power(RMS Continuous Power):
50 Watts x 2 @ 4??
100 Watts x 2 @ 2??
200 Watts x 1 @ 4?? Bridged/Mono

Vibrant Power(PVC/PowerCube?):
60 Watts x 2 @ 4??
107 Watts x 2 @ 2??
215 Watts x 1 @ 4?? Bridged/Mono

Input Sensitivity:
Low-Level: 150 mV – 4 V
High-Level: 450 mV – 12 V

Total Harmonic Distortion (THD+Noise):
4??: Less Than 1.0%
2??: Less Than 1.0%

Signal Input:
Low-Level: 2 RCA
High-Level: 4-Pin Molex

Signal Output:
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Crossover Controls:
High-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth
Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes

Visual Indicators:
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out

Dimensions (HxWxD): 1.9 x 6.8x 8.1<

• New Rockford Fosgate M2-200X2 Marine Amplifier – 200W 2-CH Element Ready Amplifier
• Element Ready design for outdoor durability
• UV stable powder-coated cast aluminum heatsink for enhanced heat dissipation
• Zinc Nickel-plated Marine grade brass connection terminals ensure corrosion resistance
• Merged features include C.L.E.A.N. input/output clip detection. top-mounted control panel. and fully adjustable crossovers
• Additional functionalities such as short circuit & over current protection. variable infrasonic filter. and balanced differential inputs contribute to optimal performance