Highlights
- Vented neodymium radial slug motor design for extreme speaker control
- Full copper sleeve on the pole-piece for low distortion and inductance
- Wide bandwidth that reaches out to 16 kHz and higher
- Naturally damped response for reduced top-octave ringing
- Low inductance for great transients and extended high frequency response
- High EBP for horn-loaded enclosures
PRV Audio 5MR450-NDY-4 5 Midrange Neodymium Woofer 4 Ohm
The 5MR450-NDY-4. from PRV Audio. is built from the ground up to be a class-leading 5 midrange for pro audio. high output car audio. and high fidelity home audio applications. Its high-powered neodymium radial slugs immerse the voice coil in a strong magnetic field. providing extreme control and high senstivity.
Not only does the unique motor design keep the mounting depth at less than 3 (great for car doors). it also reduces distortion. Additionally. the pole piece includes a copper copper sleeve which reduces inductance to improve high frequency response. With a usable. extended frequency response from 160 to 16.000 Hz. this midwoofer also works great as a high output. full range satellite speaker.
A bumped backplate. vented pole piece. vented magnet assembly. Kapton? former. open cast-aluminum frame. and treated-cloth surround allow for high power handling. while protecting this driver from extreme transient power peaks.
Product Specifications
- Nominal Diameter:5. 5-1/4. 5-1/2
- Power Handling (RMS):225 Watts
- Power Handling (max):450 Watts
- Impedance:4 ohms
- Frequency Response:160 to 16.000 Hz
- Sensitivity:94 dB 2.83V/1m
- Voice Coil Diameter:1.5
Thiele-Small Parameters
- Resonant Frequency (Fs):149.5 Hz
- DC Resistance (Re):3.7 ohms
- Voice Coil Inductance (Le):0.02 mH
- Mechanical Q (Qms):20.74
- Electromagnetic Q (Qes):0.50
- Total Q (Qts):0.49
- Compliance Equivalent Volume (Vas):0.56 ft.3
- Mechanical Compliance of Suspension (Cms):0.123 mm/N
- BL Product (BL):7.94 Tm
- Diaphragm Mass Inc. Airload (Mms):9.14g
- Maximum Linear Excursion (Xmax):2 mm
- Surface Area of Cone (Sd):95 cm2
Materials of Construction
- Cone Material:Paper
- Surround Material:Cloth
- Voice Coil Wire Material:CCA
- Voice Coil Former:Kapton? / Polyimide
- Basket / Frame Material:Cast Aluminum
- Magnet Material:Neodymium
Mounting Information
- Overall Outside Diameter:5.18 across the flats. 5.79
- Baffle Cutout Diameter:4.72
- Depth:2.60
- # Mounting Holes:4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
- Sealed Volume:0.35 ft.3
- Sealed F3:242 Hz
- Vented Volume:0.92 ft.3
- Vented F3:115 Hz
PRV Audio 5MR450-NDY-4 5 Midrange Neodymium Woofer 4 Ohm
- Brand:PRV Audio
- Model:5MR450-NDY-4
- Part Number:294-2704
- UPC:799928734356
- Product Category:Midrange / Midbass Drivers & Full-Range Speakers
- Unit of Measure:EA
- Weight:2.9000 lbs.
- California Prop 65:
WARNING: Cancer and Reproductive Harm
www.P65Warings.ca.gov
- The PRV Audio Pro Audio Loudspeaker. 5MR450-NDY-4 midrange woofer offers outstanding durability and a smooth midrange response through 16kHz
- This woofer is perfect for home Hi-Fi installs. including bookshelf. satellite. surround sound speakers and even the home studio monitors. It is a great option for three way cabinets requiring additional midrange support.
- The high end neodymium magnet assembly was chosen to increase sensitivity and power handling. This neodymium is attached to a sturdy reinforced cast aluminum frame to ensure a solid support structure for long lasting play in most any environment.
- Its light weight of only 1.21 lbs helps keep your enclosures light and is a great use for use for car doors and installers looking for high SPL midrange and upper midrange responses.
Specifications
Brand | PRV Audio |
Manufacturer Part Number | 5MR450-NDY-4 |
Reviews
There are no reviews yet.