Power Acoustik 10?? Woofer. 1200W RMS/2400W Max. Dual 2 Ohm Voice Coils

10? Woofer 2400W Max/1200W RMS – Dual 2 Ohm Voice Coils

2400 Watts Max
1200 Watts RMS
Dual 2 Ohm Voice coils
2.5? 4-Layer Coil on Aluminum Former
288 Oz. Strontium Ferrite Magnets (Dual Stacked)

Enclosure Specs:
Sealed 0.75 Cu. Ft.; Tuning Frequency: 49.7 Hz
Ported 1.25 Cu. Ft.; Tuning Frequency: 31.1 Hz; Port Size 3? x 11.5?
Mounting Depth: 6.125?

Aluminum Voice Coil Heatsink Dust Cap with Reinforcing Fins
High Density Spruce Pulp Paper Cone with UV Protection
Low Frequency Optimized Motor Structure
12mm T-Yoke & Top Plate – Improves Low Frequency Dynamics & Reduces Voice Coil Heat Build-up
Non-Magnetic/Non-Resonating Die-Cast Aluminum Frame
4-Layer Voice Coil with Large Gauge Wire
Nickel Plated Spring Loaded 8ga. Compression Terminals
Large High Density Polyether Foam Surround with UV Protection
Dual Poly-Cotton Suspension – Dampens Violent Accelerations
High Temperature Adhesives

Key Features and Benefits:

• Cast aluminum heatsink
  The anodized blue dust cap on the MOFO subwoofer looks cool. and also serves a specific purpose. Because the dust cap is coupled to an aluminum voice coil former. it acts as a heatsink. extracting heat away from the voice coil. keeping it cool.
• Non-pressed pulp cone
  Ask any sound quality enthusiast what woofer cone material they prefer. and they will all say paper. With that in mind. Power Acoustik Electronics used a beefy non-pressed pulp paper cone. The aluminum dust cap fits into recesses of the cone for additional bracing.