MTX 5512-44 12 800 Watt DVC 4-ohm Car Audio Subwoofer+Vented Sub Box Enclosure

Package Includes:
(1) MTX 12 Car Audio Subwoofer Sub
(1) Rockville Single 12 2.6 cu.ft. SPL Vented/Ported Subwoofer Enclosure Box
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals

Description for MTX Sub:
High SPL Subwoofers
55 Series Subwoofers are high SPL subwoofers that deliver the most bass for your buck. Implementing many of the same features found on our 75 & 95 Series SuperWoofers. the 55 Series can rock hard and loud for extended periods of time. while maintaining accurate and clean bass throughout the party. You will be impressed.

Features:
MTX 5512-44 12 800 Watt Peak/400 Watt RMS 4-Ohm Car Subwoofer
RMS Power Handling: 400 Watts
Peak Power Handling: 800 Watts
Recommended Amp Power: 200-400 Watts RMS
Impedance: Dual 4 Ohms
Frequency Response: 26Hz – 130Hz
Sensitivity: 85.7 dB
Voice Coil: 2 inches (Dual)
Magnet Weight: 56 oz.
Mounting Depth: 6.188 inches
Cut Out Diameter: 11.125
Volume Displacement: 52.46 cu in
Sealed Enclosure Net Volume: 1.0 cu ft.
Vented Enclosure Net Volume: 2.32 cu ft.
Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
Click here for the Installation Sheet

Features:
Rockville RBS12 Single 12 2.6 cu.ft. SPL Vented/Ported Subwoofer Enclosure Box
Single 12 SPL vented subwoofer enclosure
Designed to increase SPL – This box will make your sub louder than other enclosures
? USA Heavy Duty MDF Construction
Top of the line Glue for extra durable adhesion
High quality GOLD spring loaded terminals
Designed. tested. and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Tuning Frequency: 43 Hz
Enclosure Measurements:
Type of Enclosure: Vented
Enclosure Sub Size: Single 12
Dimensions in Inches: 14.75 L x 30 W x 14.75 H
Top and Bottom Depth: 14.75
Mounting Depth: up to 10 (enough depth for any sub on the market)
Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.7 Cubic Feet
Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet

Includes:
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure. and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly. without chipping the

Package Includes:
(1) MTX 12 Car Audio Subwoofer Sub
(1) Rockville Single 12 2.6 cu.ft. SPL Vented/Ported Subwoofer Enclosure Box
10 Drywall Wood Screws (Wood screws are the type of screws; the screws areactually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals

Description for MTX Sub:
High SPL Subwoofers
55 Series Subwoofers are high SPL subwoofers that deliver the most bass for yourbuck. Implementing many of the same features found on our 75 & 95 SeriesSuperWoofers. the 55 Series can rock hard and loud for extended periods of time.while maintaining accurate and clean bass throughout the party. You will beimpressed.

Features:
MTX 5512-44 12 800 Watt Peak/400 Watt RMS 4-Ohm Car Subwoofer
RMS Power Handling: 400 Watts
Peak Power Handling: 800 Watts
Recommended Amp Power: 200-400 Watts RMS
Impedance: Dual 4 Ohms
Frequency Response: 26Hz – 130Hz
Sensitivity: 85.7 dB
Voice Coil: 2 inches (Dual)
Magnet Weight: 56 oz.
Mounting Depth: 6.188 inches
Cut Out Diameter: 11.125
Volume Displacement: 52.46 cu in
Sealed Enclosure Net Volume: 1.0 cu ft.
Vented Enclosure Net Volume: 2.32 cu ft.
Inverted Apex Surround: Increases Surface Area Resulting in Increased VolumeDisplacement and SPL
Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved ThermalPerformance
Progressive Suspension: Controls Excursion at High Power Reducing DistortionResulting in Better Sound Quality
Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion ImprovingSound Quality
Click here for the Installation Sheet

Features:
Rockville RBS12 Single 12 2.6 cu.ft. SPL Vented/Ported Subwoofer Enclosure Box
Single 12 SPL vented subwoofer enclosure
Designed to increase SPL – This box will make your sub louder than otherenclosures
? USA Heavy Duty MDF Construction
Top of the line Glue for extra durable adhesion
High quality GOLD spring loaded terminals
Designed. tested. and engineered to work with most of today’s popular woofers.These enclosures are built with the quality additives needed to maximize theperformance of any sound system.
Tuning Frequency: 43 Hz
Enclosure Measurements:
Type of Enclosure: Vented
Enclosure Sub Size: Single 12
Dimensions in Inches: 14.75 L x 30 W x 14.75 H
Top and Bottom Depth: 14.75
Mounting Depth: up to 10 (enough depth for any sub on the market)
Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.7Cubic Feet
Net Volume Per Sub (Measurement for the outer dimensions of the box less thethickness of the wood): 2.6 Cubic Feet

Includes:
10 Drywall Wood Screws (Wood screws are the type of screws; the screws areactually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
This accessory package includes everything you need to install one subwooferinto an enclosure. and wire to connect the enclosure to your amplifier. Thispackage is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts becausethey drill into the enclosure very cleanly. without chipping the enclosure. Thespeaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100% sure that your enclosure will have a clean signal to the amplifier with thistop of the line speaker wire. These spade terminals have also been hand selectedby our installation experts to make the internal wiring simple. secure. and torun the audio signal cleanly.