Memphis Audio MXAZ24MC 2-Zone Marine Bluetooth Receiver+(4) MB QUART Speakers

Package Includes:
(1) Memphis Audio MXAZ24MC Dual Zone Marine Boat Bluetooth Receiver Stereo w/AUX/USB
(2) Pair MB QUART NF1-116B 6.5 80 Watt Marine 2-Way Coaxial Black Speakers For Boat

Features:
Dual zone with independent sub control
3 TFT wet bonded color LCD display
Video Input
Built in 4x50W amplifier
IP66 waterproof design
EEPROM memory
18 FM Presets/ 12 AM Presets
4 pair RCA pre-outputs – Front/Rear/Sub/Zone 2
Auto dimmer w/ day/night mode
Optional wired remote – MXA1MCR
AM/FM. USB. Bluetooth and AUX inputs
Separate EQ for Zone 2 output
Assignable zone 2 output
Built in adjustable crossovers

Features:
Tweeters
.75 Inch Composite Dome: Very smooth musical response. high output with minimal required amplifier power.
Cone Material
6.5 inch Composite Poly Midrange: Water resistant composite polypropylene cone with temperature stable UV Butyl rubber surround mounted on a lightweight composite frame.
Surround / Cone Coupling
UV Butyl: Butyl Rubber remains musical in all weather. Does not stiffen in cold.
Voice Coil / Former Assembly
High Temperature Voice Coil and Former: Voice coil is high temperature copper. wound on an aluminum former which allows the voice coil to handle more power while remaining light in weight.
Spider
Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
Cooling System
Front and rear venting allows air passage through the spider and back plate to exchange air over the voice coil.
Crossover
6dB high-pass: Clean and simple crossover design allows the most possible signal to get to the speaker from your source unit or amp.
Tweeter Hardware
Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun. spray and dust.
Frame
Poly Composite Frame: Composites add strength to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker and are weather resistant!
Motor
High Energy Motor assembly: High energy iron ferrite magnet for higher output and smaller overall size.
Grills
Composite Integrated: UV treated against sun fade and waterproof and are integrated into speaker frame for simple installation.
Hardware
Stainless Steel Screws.
Specification:
Weight: 3.25 lbs
Series: Nautic
Color: Black
Warranty: 1 Year
IPX Rating: IPX67
CEA Standards: CEA426B
Speaker RMS Power Handling (watts): 40
Speaker Peak Power Handling (watts): 80
Speaker Impedance (ohms): 35Hz-21kHz
Speaker Sensitivity: 89dB
Speaker Mounting Diameter / Cut Out (in): 5
Speaker Outside Diameter (in): 7
Speaker Mounting Depth / Chassis Depth (in): 2.29
Speaker Size (in): 6.5

• Package Includes: (1) Memphis Audio MXAZ24MC Dual Zone Marine Boat Bluetooth Receiver Stereo w/AUX/USB. (2) Pair MB QUART NF1-116B 6.5 80 Watt Marine 2-Way Coaxial Black Speakers For Boat
• Features of MXAZ24MC: Dual zone with independent sub control. 3 TFT wet bonded color LCD display. Video Input. Built in 4x50W amplifier. IP66 waterproof design. EEPROM memory. 18 FM Presets/ 12 AM Presets. 4 pair RCA pre-outputs – Front/Rear/Sub/Zone 2. Auto dimmer w/ day/night mode. Optional wired remote – MXA1MCR. AM/FM. USB. Bluetooth and AUX inputs. Separate EQ for Zone 2 output. Assignable zone 2 output. Built in adjustable crossovers
• Features of NF1-116B: Tweeters- .75 Inch Composite Dome: Very smooth musical response. high output with minimal required amplifier power. Cone Material- 6.5 inch Composite Poly Midrange: Water resistant composite polypropylene cone with temperature stable UV Butyl rubber surround mounted on a lightweight composite frame. Surround / Cone Coupling- UV Butyl: Butyl Rubber remains musical in all weather. Does not stiffen in cold.
• Voice Coil / Former Assembly- High Temperature Voice Coil and Former: Voice coil is high temperature copper. wound on an aluminum former which allows the voice coil to handle more power while remaining light in weight. Spider- Woven fiber composite spider to stabilize the cone and voice coil in all musical situations. Cooling System- Front and rear venting allows air passage through the spider and back plate to exchange air over the voice coil.
• Crossover- 6dB high-pass: Clean and simple crossover design allows the most possible signal to get to the speaker from your source unit or amp. Tweeter Hardware- Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun. spray and dust. Frame- Poly Composite Frame: Composites add strength to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker and are weather resistant!