STAGE1200S –
The Stage 1200S subwoofer enclosure pounds out resounding bass from a compact enclosure that fits in just about any vehicle. High efficiency combines with impressive power-handling for rich and satisfying performance. The 12 woofer cone and large voice coil work together for remarkable realism. note-perfect accuracy. and sustained bass response. And this enclosure’s striking good looks are matched by its ease of installation. Sealed slim enclosure with 12 (300mm) subwoofer.
Technical Specifications:
? Power handling: 250Wrms. 1000W peak
? Sensitivity (@2.83V/1m): 91dB
? Frequency response: 34Hz ?C 200Hz
? Voice coil diameter: 2 in (50mm)
? Impedance: 2 ohms
Club-A6001A –
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system. even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure. while a phase switch ensures that the bass will blend well with your full-range speakers.
Technical specifications:
? Mono subwoofer car amplifier
? 350 watts RMS x 1 at 4 ohms
? (600 watts RMS x 1 at 2 ohms)
? Class D amp technology
? Variable low-pass filter (32?C320 Hz. 12 dB/octave)
? Variable bass boost (0-12dB at 45Hz)
? Phase switch (0. 180 degrees)
? Preamp and speaker-level inputs
? Fuse rating: 30A x 2
? 8-gauge power and ground leads recommended ?? wiring and hardware not included with amplifier
? W x H x D = 220mm x 51.3mm x 180mm
? W x H x D = 8-11/16 x 2-1/16 x 7-1/8The JBL Club A6001A amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited..Speaker-level and low-level inputs allow the Club A6001A to integrate with both aftermarket and factory car stereo systems..Unlike many amplifiers available at similar prices. the JBL Club A6001A features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance.The Club A6001A has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise..On-board circuitry protects the Club A6001A from shorts. high-temperature. overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists
Specifications
Assembled Product Weight | 30 lb |
Brand | JBL |
Manufacturer Part Number | JBLBDL211005-03 |
Manufacturer | Harman |
Color | Multicolor |
Assembled Product Dimensions (L x W x H) | 15.00 x 9.00 x 19.00 Inches |
Reviews
There are no reviews yet.