Banda 2000.42ohm 500 watts Elite 4 Channel Max at 2 Ohm Car Audio Amplifier

* Class Car Audio Amplifier
* Total Power 14.4 @ 2 Ohms: 4 x 600 WRMS
* Total Power 14.4 @ 4 Ohms: 4 x 400 WRMS
* Total Power 14.4 Bridged @ 4 Ohms: 2 x 1250 WRMS
* Total Power 12.6 @ 2 Ohms: 4 x 500 WRMS
* Total Power 12.6 @ 4 Ohms: 4 x 300 WRMS
* Total Power 12.6 Bridged @ 4 Ohms: 2 x 1000 WRMS
* Efficiency @ 4 Ohms: 86%
* Efficiency @ 2 Ohms: 80%
* Input Voltage: 9 to 15V
* Input Impedance: 100K Ohms
* THD+Noise: less than 1%
* Input Sensitivity: 220mV to 4V
* SNR: 80dB
* Frequency Response: 5 to 22kHz (-3dBs)
* HPF (High Pass Filter): 20 to 90Hz @ 12dB/octave Linkwitz-Riley
* LPF (Low Pass Filter): 90 to 20kHz @ 12dB/octave Linkwitz-Riley
* Recommended Futilize: 100 A
* Current at Rest: 1 A
* Average Current Draw (Sinusoidal): 210 A
* Average Current Draw (Music): 100 A
* Power Wire Gauge (min. Recommended): 21mm / 4 AWG
* Speaker Wire Gauge (min. Recommended): 2 x 2.5mm / 2 x 13 AWG
* Weight (Lb): 7.2
* Height (in): 2.2
* Width (in): 8.4
* Depth (in): 9.7

• POWER SUPPLY: Class D amplifier. Total Power 14.4 2 Ohms: 4×600 WRMS. Total Power 14.4 4 Ohms: 4×400 WRMS. Total Power 14.4 4 Ohms Bridged: 2×1250 WRMS. Total Power 12.6 4Ohms Bridged: 2×1000 WRMS. 4 Ohms Efficiency: 86%. 2Ohms Efficiency: 80%
• MONO BASS AMPLIFIER INDICATORS: Blue LED: source and powered amplifier indicator. Red LED: output distortion clipping. Constant – output short circuit indicator. Yellow LED: low voltage battery. Constant – Futilize blown or missing
• POWER OUTPUT AND IMPEDANCE: Input Voltage: 9 to 15V. Input Impedance: 100K Ohms. THD+Noise: less than 1%. Input Sensitivity: 220mV to 4V. Signal to Noise Ratio: 80dB
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound
• OTHER TECHNICAL SPECS: Recommended Futilize: 100A. Current Rest: 1A. Ave. Sinusoidal Current Draw: 210A. Ave. Music Current Draw: 100A. Recommended Power Wire Gauge : 21mm/4 AWG. Recommended Speaker Wire Gauge: 2×2.5mm/2×13 AWG. Size: 2.2 x 8.4 x 9.7”