Alphasonik 4 Channel Amplifier 2000 Watts Neuron Series Class A/B Amp NA2000.4

Alphasonik 4 Channel Amplifier Neuron Series NA2000.4 The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers. Not only did they accomplish the power that is needed and desired with all the benefits of the bells & whistles that come along with it. Things like 4-way protection circuitry against thermal. short circuit. overload and DC offset and RCA throughputs to add more amplifiers. High-Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low-Level Outputs. Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded. it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed. Features ? RMS 4 Ohms: 250 Watts x 4 ? RMS 2 Ohms: 500 Watts x 4 ? RMS 4 Ohms Bridged: 1000 Watts x 2 ? Terminals: Nickel Plated ? Input Signals: Low Level & High Level Inputs ? Output Signals: Yes ? Remote Bass Knob: No ? Amplifier Protection: Thermal. Short Circuit. Overload and DC Offset ? Low Pass Crossover: 50 Hz – 250Hz ? High Pass Crossover: 60 Hz – 1.2kHz ? Variable Input Sensitivity: 200mV – 6V ? Frequency Response: 10Hz – 30kHz ? Bass Boost: 0 – 12dB ? S/N Ratio: >90dB (+/-3dB) ? Fuse Rating: ATC 35A x 2

• High-Level Inputs
  High-Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low-Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.
• Low-Level Passthrough
  The NA2000.4 is equipped with RCA PASSTHROUGH. This feature is extremely helpful for multiple reasons. If you desire to add a second amplifier later on the future and don’t have enough RCA Outputs from your source unit. You can use the RCA PASSTHROUGH to get the signals needed to add on.
• Nickel Plated Terminal Block
  Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded. it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.
• Extruded Heat Sink
  Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things. but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So. we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.

• Specifications:

  • RMS 4 Ohms: 250 Watts x 4
  • RMS 2 Ohms: 500 Watts x 4
  • RMS 4 Ohms Bridged: 1000 Watts x 2
  • Terminals: Nickel Plated
  • Input Signals: Low Level & High Level Inputs
  • Output Signals: Yes
  • Remote Bass Knob: No
  • Amplifier Protection: Thermal. Short Circuit. Overload and DC Offset
  • Low Pass Crossover: 50 Hz – 250Hz
  • High Pass Crossover: 60 Hz – 1.2kHz
  • Variable Input Sensitivity: 200mV – 6V
  • Frequency Response: 10Hz – 30kHz
  • Bass Boost: 0 – 12dB
  • S/N Ratio: >90dB (+/-3dB)
  • Fuse Rating: ATC 35A x 2