- 10000W max continuous power
- Modified sine wave with Pulse Width Modulation technology (soft start)
- Volt meter on front panel to monitor your battery voltage
- Amp meter on front panel to monitor your current use (rate at which battery is drained)
- Over Temperature LED indicator
- Over Load LED indicator
- AC direct connect terminal block
- On/off switch
- Over Temperature protection
- Over Load protection
- Single cooling fan thermally controlled
- Internally fuse protected
- AC output short circuit protection
- Auto reset on most fault conditions
- Aluminum case for optimal cooling
- Pre-wired for remote on/off switch
- Pre-slotted mounting plate
- Instruction manual
- Free 1 year tech support
- 1 Year warranty parts and labor
Features:
**THIS INVERTER REQUIRES TWO SETS OF 4/0 CABLE ( TOTAL OF 2 NEGATIVE AND 2 POSITIVE)**
Specifications:
Continuous output power:10000 Watt
Surge power capability (peak power):20000 Watt
DC input / operating voltage: 10 to 16 volts
Output voltage: 120 volts AC +/- 10%
Output wave form: modified sine wave with phase correction
Output frequency: 60 Hz +/- 1 Hz
Battery low voltage alarm: 10.5 +/- 0.5 volts
Battery low voltage shutdown: 10.0 +/- 0.5 volts
No load current: < 1.8 DC amps
Full load efficiency: 90%
1/3 load efficiency: 95%
No load minimum operating temperature: 30o F
Full load maximum operating temperature: 140o F
AC output socket type: quadruple type 2 -3 prong
High input voltage protection: 15V-17V
Low input voltage shutdown: 10V Internal fuse protection
UL maximum recommended per outlet 1500 watts
This inverter requires 2 sets of 4/0 AWG cable if you are going to run at 10000 watts
Specifications
Brand | AIMS Power |
Watts | 10000 |
Model | PWRINV10KW12V |
Manufacturer | AIMS Power |
Recommended Location | Vehicle |
Condition | New |
Volts | 12 V |
Assembled Product Dimensions (L x W x H) | 21.37 x 8.00 x 6.00 Inches |
Reviews
There are no reviews yet.