4 Rubber Front Bumper Cars Automobile Reversing Radar Probe

If you have a metal bumper. you will need these sensors which are in rubber to shield them from the steel and are very accurate. Metal tends to shrink and expand with the outside temperature and will cautilize false beeps with any sensors that is not shielded by rubber or other methods. Can be installed in the front bumper by getting power from the Brake light instead of the reverse light which is utilized for rear mounting.

Attributes

– Color: Black.
– Material: Steel.
– Size: 6.50X4.50X1.80cm/2.55X1.77X0.71in

– Parking sensor 4 sensors for retrofitting rear parking aid.
– Beeps give the driver the distance to an obstacle.
– Activation via reverse gear. it must be connected only 2 cable.
– The beeper is mounted in the trunk near the control unit.
– Modular design of the whole system -> Easy installation.
– Setup height of the sensors 45cm-65cm.
– E-mark approval free and allowed on the road.
– Car or truck rear 4 parking sensor system. fit for all passenger & trucks.
– Sensor detection range: 8 Feet.
– Enhanced anti-interference function works in Metal (steel) or Plastic Bumpers.
– All weather design. plastic housing in rubber.
– for metal / steel bumpers.

• Parking sensor 4 sensors for retrofitting rear parking aid.
• Beeps give the driver the distance to an obstacle.
• Easier installation by plug connections within the cable (see pictures).
• Activation via reverse gear. it must be connected only 2 cable.
• The beeper is mounted in the trunk near the control unit.
• Modular design of the whole system -> Easy installation.
• Setup height of the sensors 45cm-65cm.
• E-mark approval free and allowed on the road.
• Car or truck rear 4 parking sensor system. fit for all passenger & trucks.
• Sensor detection range: 8 Feet.
• Enhanced anti-interference function works in Metal (steel) or Plastic Bumpers.
• All weather design. plastic housing in rubber.
• Perfect for metal / steel bumpers.