(4) JBL Control 25-1 5.25 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers

Price is for (2) Pairs of JBL Control 25-1 5.25 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers

Description:

Designed by JBL. these Control 25-1 loudspeakers are two-way 5.25 indoor/outdoor monitors featuring weather-protected circuitry. natural and powerful representations of the frequency spectrum. black enclosures. and JBL’s proprietary InvisiBall mounting hardware. This hardware allows you to install the speakers through a hidden access point behind its logo badge. As such. the Control 25-1 suitable for venues. health clubs. theme parks. cafes. or anywhere where foreground/background music??and paging??is a necessity.

These monitors are capable of handling 200W of programmatic material at 8 Ohms. and feature a built-in multi-tap transformer for operation on distributed speaker lines. With an SPL of 110 dB. you can blast these speakers pretty loudly as well. while their cone geometry ensures a pleasurable listening experience in both on- and off-axis situations. Additionally. their PEI diaphragms render a smooth high-frequency response. But sound is not the only consideration: Kapton voice coil formers. JBL’s WeatherEdge rubberized extensions. and a durable cabinet construction provide protection against heat. rain. wind

Features:

2 JBL Control 25-1 5.25 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar
5.25 Woven-Fiberglass LF Drivers
0.75 PEI Diaphragm Tweeters
200W RMS at 8 Ohms
Durable. Weatherized Enclosures
InvisiBall Mounting Hardware
Zinc-Plated Grilles
Good for Off-Axis Listening
60 Hz to 20 kHz Frequency Response

Specifications:

Power Rating: 200 W continuous program (2 h). 100 W (400 W peak). continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h)
Nominal Impedance: 8 ohms (THRU setting)
Maximum Input Voltage: 25.3 V RMS (2 h). 50.6 V peak
Frequency Response?? 3dB: 85 Hz to 17 kHz
Frequency Response ??10 dB: 60 Hz to 20 kHz
Sensitivity: 90 dB. 1 W / 1 m (average 100 Hz to 10 k Hz)
Coverage Angle: 100?? x 100??
Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz)
Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz)
Crossover Type: 2nd order low-pass. 2nd order high-pass
Transformer Taps: 70 V: 30 W. 15 W. 7.5 W. 3.7 W. 100 V: 30 W. 15 W. 7.5 W. Insertion loss < 0.94 dB at any tap setting. Thru setting: 8 Ohms nominal
Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings)
LF Driver Size: 5.25 / 135 mm
HF Driver Size: 0.75 / 19 mm
Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection. high-temp Kapton voice coil former. high-temp voice coil wire. optimized cone geometry. linear suspension spider. and FEA optimized motor structure. HF Driver: PEI diaphragm. low-viscosity ferro-magnetic fluid. and Kapton voice coil former
Enclosure Material: High-impact polystyrene (HIPS)
Grille: Highly zinc-plated. finished in durable TGIC polyester powder-coating
Termination: Screw-down terminal strip. zinc-plated copper based. nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6. #8. or #10 lug). plus bare wire (up to 12 AWG / 2.5 mm2)
Environmental: IP-44 per IEC529; exceeds MilSpec 810 for humidity. salt-spray. temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray
Agency Rating: ROHS

• Features: 2 JBL Control 25-1 5.25 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar. 5.25 Woven-Fiberglass LF Drivers. 0.75 PEI Diaphragm Tweeters. 200W RMS at 8 Ohms. Durable. Weatherized Enclosures. InvisiBall Mounting Hardware. Zinc-Plated Grilles. Good for Off-Axis Listening. 60 Hz to 20 kHz Frequency Response. Specifications: Power Rating: 200 W continuous program (2 h).100 W (400 W peak). continuous pink noise (2 h).75 W (300 W peak) continuous pink noise (100 h)
• Nominal Impedance: 8 ohms (THRU setting). Maximum Input Voltage: 25.3 V RMS (2 h). 50.6 V peak. Frequency Response 3dB: 85 Hz to 17 kHz. Frequency Response 10 dB: 60 Hz to 20 kHz. Sensitivity: 90 dB. 1 W / 1 m (average 100 Hz to 10 k Hz). Coverage Angle:100 x 100. Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz). Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz). Crossover Type: 2nd order low-pass. 2nd order high-pass
• Transformer Taps: 70 V: 30 W. 15 W. 7.5 W. 3.7 W. 100 V: 30 W. 15 W. 7.5 W. Insertion loss < 0.94 dB at any tap setting.Thru setting: 8 Ohms nominal. Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings). LF Driver Size: 5.25 / 135 mm. HF Driver Size: 0.75 / 19 mm
• Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection. high-temp Kapton voice coil former. high-temp voice coil wire. optimized cone geometry. linear suspension spider. and FEA optimized motor structure.HF Driver: PEI diaphragm. low-viscosity ferro-magnetic fluid. and Kapton voice coil former. Enclosure Material: High-impact polystyrene (HIPS). Grille: Highly zinc-plated. finished in durable TGIC polyester powder-coating
• Termination: Screw-down terminal strip. zinc-plated copper based. nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6. #8. or #10 lug). plus bare wire (up to 12 AWG / 2.5 mm2). Environmental: IP-44 per IEC529; exceeds MilSpec 810 for humidity. salt-spray. temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Agency Rating: ROHS-compliant; Transformer UL Recognized per UL1876