(2) Pairs Rockville RV65.2C 6.5 Component Car Speakers 1500w/280w RMS CEA Rated

Video of RV65.2C:

(2) 6.5 speakers
(2) tweeters
(2) Crossovers
(2) Grills
Flush and surface Mounting accessories
Speaker wire

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. We utilize top quality polypropylene cones which are understandn for their high damping qualities. This means they can have a controlled break-up. which results in a smoother high frequency roll-off. Our Flexmotion Butyl Rubber Surrounds give the speakers a smooth response with minimal distortion. For smooth and extended high frequency sounds we utilized high temperature PEI dome tweeters with ferrite magnets. The RV series speakers are designed with superior SPL response and extremely high power handling making these perfect for utilize with the amp built into your receiver or with a high powered external amplifier. Due to their shallow mount design. these speakers fit in 97% of all vehicles.

CEA Rated.
Rockville car audio speakers are CEA rated. what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage. SPL and frequency response. So while other manufacturers status out-of-this-world wattages on their products. you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

Top of the line components!
Rockville speakers only utilize the best sourced components. We utilize efficient and high powered magnets along with aluminum voice coils wound with 100 % oxygen free copper. We pay attention to every detail ensuring you get the best sound in your car.

Attributes:

Rockville RV65.2C 6.5/6 Component car speakers (pair)
Peak Power Rating: 750 Watts per Pair / 375 Watts Each
CEA Compliant RMS Rating: 140 Watts per Pair / 70 Watts Each
Injection Molded Polypropylene woofer cone gives amazing bass and mids
Flex Motion Butyl Rubber Surround
1.2 PEI dome tweeter with ferrite magnet give amazing highs
Flush and surface mounting tweeter options
Fine-tuned 2-Way Crossover. 12db/Octave Roll Off
Ferro Fluid Cooled Tweeter Magnet
Steel high quality binquireet
Rubber magnet boot cover
Frequency response: 34-22.000 Hz
Sensitivity: 91 dB @ 1w/1m
Mount depth: 2.17
Impedance: 4 Ohm
Grilles included
Aluminum voice coils
100% oxygen free copper voice coil windings
Black electro-plated T-yoke and washers
Cotton spider material
Copper terminals
Cutout diameter: 4.92
Magnet: 8 Oz Y25 magnet
Magnet dimensions: 80mm x 12mm
Fs: 95.37 hz
Re: 3.6 OHM
Qes: 1.494
Qts: 0.864
Qms: 2.049
Fits 6 and 6.5 openings
Top mounting depth of woofer: 2.17 Inch (95% of installs utilize the top mounting depth)
Bottom mounting depth of woofer: 2.6 inch (This measures the speaker from top to bottom)
Top mounting depth of tweeter: 0.79
Bottom mounting depth of tweeter: 1.18
Tweeter mounting d

• (2) 6.5 speakers. (2) tweeters. (2) Crossovers. (2) Grills. Flush and surface Mounting accessories. Speaker wire. Rockville RV65.2C 6.5/6 Component car speakers (pair). Peak Power Rating: 750 Watts per Pair / 375 Watts Each. CEA Compliant RMS Rating: 140 Watts per Pair / 70 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround
• 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover. 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality binquireet. Rubber magnet boot cover. Frequency response: 34-22.000 Hz. Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters
• Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.17. Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. Cotton spider material. Copper terminals. Cutout diameter: 4.92. Magnet: 8 Oz Y25 magnet
• Magnet dimensions: 80mm x 12mm. Fs: 95.37 hz. Re: 3.6 OHM. Qes: 1.494. Qts: 0.864. Qms: 2.049. Fits 6 and 6.5 openings. Top mounting depth of woofer: 2.17 Inch (95% of installs utilize the top mounting depth). Bottom mounting depth of woofer: 2.6 inch (This measures the speaker from top to bottom). Top mounting depth of tweeter: 0.79. Bottom mounting depth of tweeter: 1.18
• Tweeter mounting diameter: 1.93