Power Acoustik MOFOS-12D2 12 2500 Watt Car Subwoofer+Sealed Sub Box Enclosure

Package Includes:
(1) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofer DVC 2-Ohm Sub
(1) Rockville RMS12 Single 12 Sealed 1.6 CU FT Car Sub Enclosure Box 3/4 MDF
(1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire. Screws. Spades

Features:
Overcompensating Motor Structure for Increased Magnetic Strength
12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat
Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone
Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
2.5 4-Layer Voice Coil w/ Large Gauge Wire Increases Power
High-Temperature Tolerance Adhesives Resist Thermal Failure
Nickel Plated 8ga Spring-Loaded Compression Wire Terminals
Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
High-Density Polyether Foam Surround w/ UV & Chemical Protection
Dual Poly-Cotton Suspension Dampen Violent Accelerations
Stitched Voice Coil Leads Prevent Potential Damage
1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included

Specifications:
Efficiency (1w/1m): 86.40
Voice Coil Configuration: 2.50?? Dual 2??
Motor Volume: 254oz
Re: 3.850?
Fs: 27.38Hz
Qes: 0.383
Qms: 5.443
Qts: 0.357
Diameter: 12
Vas: 1.55ft3
Bl: 20.13tm
Mms: 219.677g
Cms: 138.664
Sen: 86.35db
MAX Power: 2.500w
RMS Power: 1.200w
Cutout Diameter: 11
Mount Depth: 6.25
Weight: 16lbs.
Enclosure Dimensions
Included in this manual are a number of different enclosure suggestions. These are by no means the only enclosures to use. but they provide a starting point to determine the correct enclosure for your needs many factors must be addressed (amount of power. vehicle. placement. crossovers. etc) Therefore. as al-ways. Power Acoustik recommends that your subwoofer be installed by an authorized Power Acoustik dealer.
Enclosure Construction
All enclosures should be made of .75 (3/4) material only. When possible. make the baffle 1.5 (1 ?) thick and add .75 (3/4) to the depth of the enclosure to compensate. All volumes INCLUDE vent/port and subwoofer displacements. DO NOT change the volume unless you plan on adding a substantial amount of bracing. For added performance. applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out reflections within the enclosure.

Features:
Rockville RMS12 Single 12 1.6 cu. ft. MDF Sealed Subwoofer Enclosure
Single 12 Sealed
Machine precision cut mounting holes
? USA Heavy Duty MDF Construction
Top of the line Glue for extra durable adhesion
High quality GOLD spring loaded terminals
Designed. tested. and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Designed to give the best sound quality
Enclosure Measurements:
Type of Enclosure: Sealed

Enclosure Sub Size: Single 12
Dimensions in Inches: 18&

Power Acoustik MOFOS-12D2 12" 2500 Watt Car Subwoofer+Sealed Sub Box Enclosure