Rockville RXD-T2 Micro Car Audio Class D Amplifier 2400w 2 Channel 2x600W RMS

Description:

The RXD-T2 is part of the Rockville proton series. The RXD-T2 is a 2 channel Amplifier with 2400 watts peak output and 2×600 watts Dyno Certified RMS Power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker. Rockford. Alpine. etc. 

Features:

• Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified )
• Full-Range Class D Amplifier Architecture
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
  • 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
  • 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
  • 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)
  • 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
• Fully marine grade amplifier
• Protected from moisture. saltwater. UV. bumps. vibrations. heat. cold. and more
• Double Sided Surface Mount (SMD) PCB Design
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• RCA Preamp Line Output
• Status Mode LED Indicator
• 8 Volt Preamp Circuitry
• 4 Gauge Lucite Encapsulated Power/Ground Terminals
• 12 Gauge Lucite Encapsulated Speaker Terminals
• Fully Adjustable 12dB / Octave Crossover
• Low Pass 50Hz – 250Hz
• High Pass 50Hz – 250Hz
• Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
• Minimum THD at Rated Power: < 0.05%
• Frequency Response: 15Hz – 20KHz
• S / N Ratio: 100dB
• S/N Ratio: >97dB
• Damping Factor: > 200 @ 100Hz
• 3 x 35 Amp Fuses
• Dimensions: (W x H x L) 6.7 x 1.98 x 12.25

Owner’s Manual

• Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified ).
• Full-Range Class D Amplifier Architecture. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD.
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc). 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged. Fully marine grade amplifier. Protected from moisture. saltwater. UV. bumps. vibrations. heat. cold. and more. Double Sided Surface Mount (SMD) PCB Design.
• High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. Status Mode LED Indicator. 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals.
• 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB / Octave Crossover. Low Pass 50Hz – 250Hz. High Pass 50Hz – 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. Minimum THD at Rated Power: < 0.05%. Frequency Response: 15Hz – 20KHz. S / N Ratio: 100dB. S/N Ratio: >97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Fuses. Dimensions: (W x H x L) 6.7 x 1.98 x 12.25