Rockville Krypton M5 8000 Watt Peak / 2000w RMS Mono 1 Ohm Car Amplifier Amp

What’s in the Box:

Amplifier
Bass Remote with clipping indicator
Birth sheet with tested power
Owner’s manual
Mounting Screws
Warranty

Description:

The Krypton series of amplifiers by Rockville are engineered to be reliable and are packed with features. Whether you are a car audio competitor or just like to enjoy loud music we engineered and designed these amps from the ground up to give you great sound quality. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

Our favorite feature of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool. you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).

We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.

Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ’s are created equal. Some bass EQ’s will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give as much clean power to your subs as possible.

Features:

Rockville Krypton-M5 8000 Watt Peak / 2000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
1 Ohm: 2000 Watts x 1 Channel <1% THD+N (79% efficient)
2 Ohm: 1300 Watts x 1 Channel <1% THD+N (86% efficient)
4 Ohm: 780 Watts x 1 Channel <1% THD+N (89.5% efficient)
Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)
1 Ohm: 8000 Watts x 1 Channel
2 Ohm: 5200 Watts x 1 Channel
4 Ohm: 3120 Watts x 1 Channel
Digital Voltage Display on Amp (Accurate within 0.15V)
Power/Protect/Clip LED Indicators on the front panel
Power/Protect/Clip LED Indicators on Remote control
Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Low Pass Filter: 50Hz – 250Hz
Subsonic Filter: 15Hz – 55Hz
Fully Adjustable 12dB Bass Equalizer
Remote Dashboard Subwoofer Control
8 Volt Preamp Circuitry
Phase Control Switch
High-Speed MOSFET Power Supply
Optical Coupler Class D Technology
Full IC-Controlled Protection Circuitry
Mute and Delay Soft Start System
RCA Preamp Line Output
Status Mode LED Indicator
Minimum THD at Rated Power: <0.1%
S / N Ratio: >90dB
Frequency Response: 15Hz – 250Hz
Damping Factor: >150 @ 100Hz
200A External Fuse Included
Passes the Signal Burst Test (Instant sig

Rockville Krypton-M Watt Peak / 2000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp..Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 1 Ohm: 2000 Watts x 1 Channel <1% THD+N (79% efficient)..2 Ohm: 1300 Watts x 1 Channel <1% THD+N (86% efficient). 4 Ohm: 780 Watts x 1 Channel <1% THD+N (89.5% efficient). Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc)..1 Ohm: 8000 Watts x 1 Channel. 2 Ohm: 5200 Watts x 1 Channel. 4 Ohm: 3120 Watts x 1 Channel. Digital Voltage Display on Amp (Accurate within 0.15V). Power/Protect/Clip LED Indicators on the front panel..Power/Protect/Clip LED Indicators on Remote control. Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry