Infinity Reference 7005A 5-Channel 50W x 4 RMS Power Class-AB/D Car Amplifier

BRAND NEW

INFINITY REFERENCE 7005A

5-Channel 50W x 4 RMS Power Class-AB/D Car Amplifier

Key Features:

• Reference Series Class AB / D 2 ohms Stable 5-Channel Amplifier
• RMS Power Rating:
• – 4 ohms: 50 watts x 4 channel + 320 watts x 1 channel
• – 2 ohms: 65 watts x 4 channel + 500 watts x 1 channel
• – Bridged: 140 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total power output: 280 watts
• LED Power/Protect Light
• Wired bass level remote control included
• Speaker-level (high-level) inputs
• Mono output of pre-amp outputs
• Signal sensing remote turn-on
• 3-way protection circuitry (thermal. overload. and speaker short protection)
• Input sensitivity:
• – Low level: 200mV – 2.0 volts
• – High level: 2mV – 20 volts
• Frequency Response: 10 – 40000 Hz
• Total Harmonic Distortion (THD): >1%
• Signal to Noise Ratio: 80 dB
• Variable high-pass filter: 32 – 320 Hz
• Variable low-pass filter: 32 – 320 Hz
• Variable Bass Boost: 0 – 12 dB
• Fuse Rating: 90A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 14-3/16 L x 7-1/8 W x 2-3/16 H

1. 5 channel car amplifier
2. 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
3. 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
4. 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
5. Variable high- and low-pass filters (32?C320Hz. 12dB/octave) on front and rear channels
6. Low-pass filter (32?C320Hz. 12dB/octave) on subwoofer channel
7. Bass boost on subwoofer channel (0-12dB at 45Hz)
8. Phase switch on subwoofer channel (0. 180 degrees)
9. Preamp and speaker-level inputs
10. Fuse rating: 30A x 3
11. 4-gauge power and ground leads recommended ??
12. wiring and hardware not included with amplifier
13. W x H x D = 360mm x 55.5mm x 180mm
14. W x H x D = 14-3/16 x 2-3/16 x 7-1/8