PRV Audio 294-2886 PRV Audio 3DF750/5000 Three-Way Crossover Board 750/5.000 Hz with Selectable Attenuation

PRV Audio 3DF750/5000 Three-Way Crossover Board 750/5.000 Hz with Selectable Attenuation
PRV Audio’s 3-way 3DF750/5000 crossover (with crossover points at 750 and 5.000 Hz) is designed to be used with passive (unpowered) speakers. Selectable 4 or 8-ohm woofer impedance and 12 dB/octave woofer low pass slops allow you to use this crossover with single and double woofer 3-way cabinets. High frequency level adjustments of 0 or 4 dB and midrange frequency level matching of 0. 4. or 7 dB is provided.

High quality components are used throughout for longevity and great sound. and the impedance. as well as high frequency attenuation. is selected by convenient on-board jumpers. Made in Brazil.

Specifications: ? Power handling: 450 watts RMS. 900 watts program power ? Crossover points: 750 Hz low-pass 12 dB/octave slope for woofers. 750 to 5.000 Hz. 12 dB/octave band-pass for mids. 5.000 Hz. 12 dB/octave high-pass for compression drivers ? Attenuation: 0 or 4 dB for highs. 0. 4. or 7 dB for mids.
Product Specifications

• Crossover Type:3-Way
• Configuration:Assembled Board Only

PRV Audio 3DF750/5000 Three-Way Crossover Board 750/5.000 Hz with Selectable Attenuation

• Brand:PRV Audio
• Model:3DF750/5000
• Part Number:294-2886
• UPC:602938021821
• Product Category:Assembled Passive Crossovers
• Unit of Measure:EA
• Weight:1.5 lbs.
• California Prop 65 :
  Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Highlights

• 4 or 8 ohm woofer impedance for use with single or dual woofer cabinets
• Selectable attenuation for mids and highs
• 12 dB/octave rolloff for woofer. midrange. and tweeter
• Made in Brazil

NOTE: PO BOX deliveries are not available.

The item can’t be shipped to AF. AA. AC. AE. AM. AP. HI. AK. PR in the Unite States.PRV Audio crossovers are designed and constructed with special attention to both component quality and mechanical rigidity. Not only do our crossovers sound good. they can withstand the use and abuse associated with transportation and of live performances. Our crossovers offer some unique selectable futures:.WOOFER IMPEDANCE SELECTION: This setting allows the same crossover to be used with 8 or 4 Ohms speakers and combinations of them (series or parallel connection) providing you with one solution for multiple cabinet variations..WOOFER ROLL-OFF CROSSOVER ADJUSTMENT: Some woofers respond excessively at the cut frequency than others and need 12 dB/octave filters. where other woofers have a natural roll-off at or near the crossover point. and work well with 6 dB/octave filters. We give you the ability to select this on two of our crossovers: the 2DF1800 two-way crossover and the 3DF three-way crossover.SPEAKER ATTENUATION: Match the output level of the different speakers in your cabinet with the setting it helps in creating a seamless transition from high to mid to low-especially useful for when driver sensitivities do not match..BRIGHTNESS ADJUSTMENT: Many large format compression drivers naturally roll-off above 10 kHz. Our brightness adjustment offsets this phenomenon . applying attenuation below 6 kHz and increasing the energy at high frequencies for more brightness and definition.