MB QUART MBQX-STG3-1 Full Audio Package For Select 2017-2020 Can-Am Maverick X3

Compatible vehicle fitment
Can-Am Maverick X3 2017 and newer
Marine grade protection/ipx rating
IPX67
Source unit features
QUICK PAIR immediately connects to the last device that was connected and you’ll have full Apple Control with Bluetooth capabilities. This unit also displays Album Artwork. if present. in your file. High voltage output guarantees maximum volume when running external amplifiers.
Speaker features
These speakers are meticulously engineered to fit in the X3 dash. They include a 1 Titanium Dome Tweeter that will deliver natural sounding high frequency response. while producing high volume. Injection molded composition Polypropylene cone produces impactful bass with minimal cone flex. The Composite (UV Resistant ASA+Fiberglass) frames are incredibly strong and lightweight. The entire assembly earns an IPX68 rating which makes it as indestructible as the X3.
Amplifier features
The Can Am system is powered by the NA2 series of amplifiers. The stereo amplifier is operating in 4 ohm mode in a STAGE3 set up. to increase volume and power. add the rear pods and the amplifier changes automatically to 2 ohm mode to deliver maximum volume for all 4 speakers after the pods are added.
Subwoofer features
400 Watt SUB STAGE Specific 10 inch Underseat Subwoofer System includes 10 inch. Dual 4 ohm Subwoofer. Maverick X3 Specific Under-Seat Subwoofer Enclosure. and 400 Watt Class D.
Mount/harness
Plug and Play Harness. Waterproof Connectors with premeasured wires. No guess work. no installation mistakes.
Time and tools
Standard hand tools are required. See the manual for time on each of the different components.

Specifications of NA2-400.1:

Class: Full Range Class D
Variable Voltage: 0.2V~9V
Signal to Noise Ratio: >100dB
Frequency Respponse: 10Hz-300Hz
Crossover Type: Electronic 12dB Per Octave
Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz
Bass Boost: 0-12dB@45Hz
Subsonic Filter: 60Hz
Power @ 2-Ohms:1 x 400W
Power @ 4-Ohms: 1 x 200W
Total channels: Mono
Audio Inputs: RCA
Power Terminal 12V/GND: Molex 10 ga
Speaker Terminal Wire Gauge: Molex Plug Connector
Fusing: 1 x 30 Amps
Certifications: Marine & Powersports
Dimensions: 3.70 X 5.51 X 1.77 in
Weight: 2.09 lbs

Specifications of NA2-400.2:

Class: Full Range Class D
Variable Voltage: 0.2V~9V
Signal to Noise Ratio: >90dB
Frequency Response: 20Hz-20kHz
Crossover Type: Electronic 12dB Per Octave
Low Pass Crossover: Switch Low Pass 300 Hz
Bass Boost: 0-12dB@45Hz
Subsonic Filter: 60Hz
Power @ 2-Ohms: 2 x 200W
Power @ 4-Ohms: 2 x 100W
Total Channels: 2
Audio Inputs: RCA
Power Terminal 12v/GND: Molex 10 ga
Speaker Terminal Wire Gauge: Molex Plug Connector
Fusing: 1 x 30 Amps
Certifications: Marine & Powersports
Dimensions: 3.70 X 5.51 X 1.77 in
Weight: 2.12 lbs

Specifications of NP1-116:

RMS POWER HANDLING (WATTS): 60
PEAK POWER HANDLING (WATTS): 120
SPEAKER IMPEDANCE (OHMS): 4
FREQUENCY RESPONSE: 30Hz-22kHz
SENSITIVITY: 92dB
CROSSOVER SLOPE: 6dB / Octave
MOUNTING DIAMETER/CUT OUT (IN): 5.6
MOUNTING DEPTH/CHASSIS DEPTH (IN): 3.05

Specifications of GMR-LED:

MB Quart OFF-ROAD & Marine Multimedia Source Unit with 160 Watt internal amplifier features AM/FM/Bluetooth.
OFF-ROAD & Marine M

• Features of MBQX-STG3-1: Compatible vehicle fitment: Can-Am Maverick X3 2017 and newer. Marine grade protection/ipx rating. IPX67. Source unit features: QUICK PAIR immediately connects to the last device that was connected and you’ll have full Apple Control with Bluetooth capabilities. This unit also displays Album Artwork. if present. in your file. High voltage output guarantees maximum volume when running external amplifiers.
• Speaker features: These speakers are meticulously engineered to fit in the X3 dash. They include a 1 Titanium Dome Tweeter that will deliver natural sounding high frequency response. while producing high volume. Injection molded composition Polypropylene cone produces impactful bass with minimal cone flex. The Composite (UV Resistant ASA+Fiberglass) frames are incredibly strong and lightweight. The entire assembly earns an IPX68 rating which makes it as indestructible as the X3.
• Amplifier features: The Can Am system is powered by the NA2 series of amplifiers. The stereo amplifier is operating in 4 ohm mode in a STAGE3 set up. to increase volume and power. add the rear pods and the amplifier changes automatically to 2 ohm mode to deliver maximum volume for all 4 speakers after the pods are added.
• Subwoofer features: 400 Watt SUB STAGE Specific 10 inch Underseat Subwoofer System includes 10 inch. Dual 4 ohm Subwoofer. Maverick X3 Specific Under-Seat Subwoofer Enclosure. and 400 Watt Class D. Mount/harness: Plug and Play Harness. Waterproof Connectors with premeasured wires. No guess work. no installation mistakes.. Time and tools: Standard hand tools are required. See the manual for time on each of the different components.
• Specifications of NA2-400.1: Class: Full Range Class D. Variable Voltage: 0.2V~9V. Signal to Noise Ratio: >100dB. Frequency Respponse: 10Hz-300Hz. Crossover Type: Electronic 12dB Per Octave. Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz. Bass Boost: 0-12dB@45Hz. Subsonic Filter: 60Hz. Power @ 2-Ohms:1 x 400W. Power @ 4-Ohms: 1 x 200W. Total channels: Mono. Audio Inputs: RCA. Power Terminal 12V/GND: Molex 10 ga. Speaker Terminal Wire Gauge: Molex Plug Connector. Fusing: 1 x 30 Amps.