Rockville HT120 2 360w Car/Pro Aluminum Horn Titanium Tweeter w/ 2 Voice Coil

What’s in the Box:

(1) HT120 Tweeter pre-Installed in an aluminum horn
Mounting Screws
Warranty Card
Owner’s Manual

Features:

Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2 Voice Coil
Top of the line Rockville high frequency driver pre installed in an aluminum horn
Titanium diaphragm tweeter
Bolt-on style system
Type: Compression driver
RMS Power: 120W
MAX Power: 360W
Sensitivity: 105dB @ 1w / 1m
34 oz Magnet
2 High Temperature Die Cast Kapton Voice Coil
Ferro Fluid Enhanced Voice Coil Cooling
Impedance: 8 Ohms
Frequency Response: 800Hz – 20kHz
We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave
Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving
Horn Dimensions: 6.2 x 6.2 x 5.1 (158 x 158 x 130 mm)
Throat Diameter: 2
Overall Depth: 7.6 (193 mm)
Cutout Diameter: 5.79
Mounting Depth: 7.36
Extremely loud and clear highs with an amazing frequency response that can even play some mids
Shallow Mounting Depth

• What’s in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn. Mounting Screws. Warranty Card. Owner’s Manual. Features: Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2 Voice Coil. Top of the line Rockville high frequency driver pre installed in an aluminum horn
• Titanium diaphragm tweeter. Bolt-on style system. Type: Compression driver. RMS Power: 120W. MAX Power: 360W. Sensitivity: 105dB @ 1w / 1m. 34 oz Magnet. 2 High Temperature Die Cast Kapton Voice Coil. Ferro Fluid Enhanced Voice Coil Cooling. Impedance: 8 Ohms. Frequency Response: 800Hz – 20kHz
• We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave
• Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving
• Horn Dimensions: 6.2 x 6.2 x 5.1 (158 x 158 x 130 mm). Throat Diameter: 2. Overall Depth: 7.6 (193 mm). Cutout Diameter: 5.79. Mounting Depth: 7.36. Extremely loud and clear highs with an amazing frequency response that can even play some mids. Shallow Mounting Depth